Important

In the event, if you are racing under rainy/muddy condition


Please USE 1.1 mm spring X 4 pcs in your JVD-RC clutch system.

* If possible please use taller gearing. EG - 48T spur gear and 13T clutch bell with the combination as above *


Thank you

JVD-RC-Asia

Part lists for JVD-RC- clutch system

Clutch 34 complete set - JVD 90409 
For: Losi, Caster, Mugen, Hongnor, Associated, XRAY, GS Racing, HPI D8, etc

Clutch 32 complete set - JVD 90409 A
For: Kyosho MP9 only

Clutch including 12 springs - JVD 90410

12 springs ( 0.9, 1.0, 1.1 mm )- JVD 90412

Tool for clutch removal - JVD 90411

For more information, please contact us:

JVD-RC-Asia@ckgroup.com.my

Instruction:-

Click picture for larger size
-----------------------------------------------------------------------

JVD RC Clutch system for 1/8th Buggy and Truggy

After 2 hours of run time:-

1. Clutch feels consistent and no lacking in engine performance;
2. Wear is minimal;
3. Clutch bell bearing ( inside/outside ) is still in good condition;



After 1.5 gallon of usage

Comparison side by side with old and new clutch shoes

JVD-RC Clutch system

CK Group to sell JVD-RC Clutch ( Holland ) in South East Asia.

Please note CK had secured the rights to distribute the famous JVD-RC Clutch (Holland) in South East Asia.

It is a new 4 shoe clutch system (design and manufacture in Holland) Jan Van Dijk

said almost 80 % of the hard core drivers there were using it for their races. Wear and tear of this clutch is amazing and lasts for gallons under normal driving conditions. And Jan confirms JQ is using these clutch.

“ The JVD-RC clutch is awesome. I drove 3 gallons, AT LEAST with it. And it’s still going. “

Description:-

- Easy to assemble( Press ) / disassemble ( Pull ), no modification

- Load spring - Turn crown anti clockwise

- Long lasting and reliable

- Smooth engagement of clutch and performance

- All buggies and Truggies covered; 32 or 34 mm flywheel and suitable for .21 size engine

- Use the JVD-RC clutch system with your ORIGINAL buggy / truggy CLUTCH BELL

- For Mugen, Kyosho, Hongnor, HPI D8, GS Racing, Xray, Caster, Associated, Losi etc

For enquiry/distribution in Malaysia, Singapore, Brunei, Indonesia and Thailand

Please contact us:

max-racing@hotmail.com
( Subsidiary of CK Group )